SCAD Office: which modules do you need?

SCAD Office is an integrated software suite for the analysis and design of building and civil structures. It is built around the SCAD++ finite element core, complemented by code-checking modules, advanced analysis functions, satellite programs, cross-section tools and electronic manuals. Everything is modular: you build the set you need.

1. Two editions, two licensing options

The SCAD++ core comes in two editions, which differ by model size:

S392
Up to 392,000 degrees of freedom (about 65,000 nodes).
S Promax
Unlimited model size.

Two licensing options:

Purchase (permanent license)

Build your configuration and buy it once.

Available in both editions, module by module or as bundles. Users of earlier versions can upgrade to the current version on preferential terms.

Annual license

Full SCAD Office, S Promax edition, for 12 months.

The complete package, with all satellite programs and electronic manuals. You use the latest version for as long as your license is active. Volume terms from 2 installations.

Educational institutions: an S64 network version (up to 20 workstations) is available for schools and universities, with one S Promax license for teachers.

2. The SCAD++ core (always included)

SCAD++

  • Linear static and dynamic solver with a full finite element library (bars, plates, solids).
  • A single graphical environment to build the model and review results.
  • Load combinations and design combinations (forces, displacements, reactions).
  • Stability analysis, checks according to various strength theories, center of rigidity of floors.
  • Progressive collapse analysis.
  • Loads from part of a model; FORUM preprocessor for large models.
  • AutoCAD interface (DXF and DWG import); export of results to Excel and Word.

→ Learn more about SCAD

3. Code-checking and design modules

These modules check and design members according to national standards. They are added to the core, on their own or combined:

Reinforced concrete (RC)
Analysis and reinforcement selection for reinforced concrete members.
Steel (SS)
Checking and section selection for steel members.
Timber (TS)
Checking of timber members.
Universal (US)
All three: reinforced concrete, steel and timber.

4. Advanced analysis functions

Each function extends the SCAD++ core independently. For example, construction sequence analysis can be run in a linear formulation; to account for nonlinear material behavior, it is combined with the physically nonlinear solver.

Response spectra
Accelerogram-based analysis, with floor response spectra.
Physical nonlinearity
Solver accounting for nonlinear material behavior.
Geometric nonlinearity
Solver for large displacements.
Frequency response
Dynamic effects of equipment and vehicles.
Model variations
Accounting for uncertainty in the design model.
Erection
Analysis taking construction stages into account.
Fire resistance
Unprotected steel and reinforced concrete members.

5. Satellite programs

Standalone programs for the design of structural members and certain connections, according to Eurocodes and other national standards. They run on their own or with SCAD++.

ARBAT
Analysis and reinforcement of reinforced concrete members.
COMET
Design of steel connections (Eurocode 3).
KRISTALL
Checking and selection of steel members (Eurocode 3), including damaged structures.
MAGNUM
Cold-formed steel load-bearing members (Eurocode 3).
MONOLIT
Design of reinforced concrete ribbed floors.
WEST
Wind, snow and temperature loads (EN).
CROSS
Subsoil parameters from geotechnical investigations.
ZAPROS
Analysis of soils and foundations.
DECOR
Analysis of timber members.
KAMIN
Masonry and reinforced masonry.
SLOPE
Slope stability.

6. Cross-section tools and electronic manuals

Cross-section tools

  • Section Builder: built-up sections (rolled profiles and plates) and their properties.
  • CONSUL: arbitrary bar cross-sections.
  • TONUS: thin-walled sections, based on thin-walled section theory.
  • SEZAM: finds a standard section equivalent to an arbitrary one.
  • All exchange data with SCAD++ both ways.

Electronic manuals

  • CoCon: stress concentration factors and stress intensity factors.
  • KUST: engineering theory and design manual.
  • Electronic versions of the reference handbooks.

7. Bundles for purchase

SCAD Office

  • Full SCAD Office: core, design modules, advanced functions, satellite programs, cross-section tools and electronic manuals.
  • SCAD Office without advanced functions: core, design modules, satellite programs and cross-section tools.
  • Satellite bundle: all satellite programs, usable on their own.

→ Read our introduction to SCAD Soft

These bundles are available for purchase, in the S392 or S Promax edition. You can also build your own configuration, module by module.

Which configuration fits you?

Tell us what types of structures you design, which codes you apply and how many users you have: we will recommend the right configuration. We would be happy to introduce SCAD Office in a short online presentation.

Request a presentation